Select Page

All competent sailors need to have a good basic understanding of how to interpret a weather forecast. They also need to be able to interpret the actual conditions they are experiencing.

Most weather forecasts present a general picture of what to expect in a given area over a period of time. We rely on such forecasts to provide basic information, but the actual weather and sea conditions we experience don’t always tally with the general view.

This is not necessarily the forecasters’ fault, as it is the local tides, topography and sea breezes that interact with this basic picture and give rise to the actual conditions we experience out on the water. To make more accurate predictions of the weather in your specific area requires more in depth knowledge and skill.

This section through a depression has wind moving from left to right. High cirrus is followed by layers of cloud which gradually become lower as the warm front passes, bringing rain. Thick stratus cloud in the warm sector is followed by heavy rain and eventually cumulus cloud appears, eventually giving way to sunshine:

A typical depression in the northern hemisphere moves in an anti-clockwise direction with low pressure in the centre:

A cold front is approaching with towering cumulus and heavy rain. Squalls are common accompanied by high winds exceeding 20 knots:

It is up to the skipper to make a calculated interpretation of the available forecasts and to decide whether it is safe for their vessel and crew to go afloat.  At the same time by studying the weather conditions they can check:

  • Where in the forecast weather pattern they actually lie?
  • Has the predicted front passed through yet?
  • The current wind strength. Has it changed through the last few hours?
  • The atmospheric pressure. Is it rising or falling?

Sources of weather forecasts

If you are planning a trip, it is best to gather as much reliable information as you can.  Sources of weather forecasts include:

  • Weather apps – I use PredictWind, Windfinder and Windy. There are many others.
  • National meteorological offices.
  • Internet – good source for GRIB forecasts (Gridded Information in Binary files),eg UGrib, weather charts, web services eg Windguru also back-up to VHF, NAVTEX, INMARSAT-C and SSB radio.
  • MSI (Marine Safety Information) broadcasts on VHF and SSB radio.
  • Public service broadcasts on radio and tv.
  • NAVTEX, Weatherfax and INMARSAT-C.
  • Harbour and marina offices.

Caution: The internet is not part of the MSI system and should never be relied upon as the only means to obtain the latest forecast and warning information. Access to the service may be interrupted or delayed from time to time, updates may also be delayed. Refer to GMDSS services, INMARSAT SafetyNET or NAVTEX for the latest information. When using these web pages, check that the page on your screen is not from your cache. Use the Refresh button if in doubt.

Compare a number of pressure charts to see how the weather patterns have been forecast to evolve in your area over a number of days. This will help you to judge when fronts will pass through, what local conditions will be as a result and how this tallies with your planned departure and route plan.

Before you go

Study your charts and estimate when and where you can expect wind against tide. Are the elements going to clash severely and if so when is this going to happen?  Will you need to avoid being in that area or will the conditions be manageable?

Always study the weather forecast thoroughly before going afloat in order to remain safe and to make an efficient passage plan. Before departure, download forecasts to cover the anticipated length of your passage. Be prepared to delay your departure or change your destination if the weather forecast is unfavourable.

Once committed to going, ensure that you have the means to get regular, reliable weather forecasts if you are at sea for any length of time.  This will allow you to change your plans and head for a safe haven if the forecast is for stormy weather, and to take advantage of detailed weather information when planning your route.

Tips:

  • Study the Beaufort scale and use it to judge wind strengths.
  • Practice how to interpret barometric pressure charts.
  • The barometer is arguably the most useful forecasting tool. Keep a note in the log to monitor change in barometric pressure.
  • Learn how to observe cloud formations to forecast the weather.

Seacock maintenance

If seacocks are always left open and neglected they can eventually seize which will prove a serious threat to boat safety should a connecting hose fail and the seacock refuses to close. There are three main types of seacock – ball valves, cone valves and gate valves.

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 4 – Navigation

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the fourth of a 10-part post where solo sailor, Bernie Branfield, shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Sail care and maintenance – Part 2

At the end of the sailing season sails should be washed and inspected carefully for damage, including small tears, stitching failure, ultraviolet damage, stains and mildew.

Pre-start engine checks

According to the Royal National Lifeboat Institution (RNLI) almost one third of emergency call outs at sea are caused by mechanical failure. Many engine breakdowns are avoidable. The best way to avoid a breakdown is to carry out pre-start checks before heading out to sea.

How to cope with an emergency at sea

A safe skipper will be mentally prepared for all kinds of potential emergencies happening at sea, including medical emergencies, engine failure, fire, a holed hull, capsize and dismasting.

Boat batteries

Under-sized battery banks are one of the key factors behind power failure at sea, as well as the premature failure of batteries, so make sure that your boat battery measures up to the use you want to put it to.

Rewiring a boat – overcoming the challenges involved

Skippers need to have a basic knowledge of boat electrics, to avoid potential problems and to be able to solve them when they happen.

Keel maintenance and repair – Part 1

Keels are designed to act as underwater foils that generate lift as the boat moves through the water, counteracting the leeward force of the wind and enabling the boat to sail closer to the wind. Keel maintenance and repair is essential for the performance of your boat.

ColRegs Nav Lights & Shapes, Rules Of The Road and IALA Buoys Apps

ColRegs Nav Lights & Shapes, Rules Of The Road and IALA Buoys Apps Make Learning Rules on iPhone, iPad, iPod and Android...

The Boatyard Book – a boat owner’s guide to yacht maintenance, repair and refitting

The Boatyard Book is a fully illustrated 224 page practical reference manual that provides advice for boat owners on planning and carrying out annual maintenance, repairs, upgrades and refits of sailing yachts and motorboats, up to 20 metres in length.

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 10 – The Return Trip

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the final instalment of a 10-part post where solo sailor, Bernie Branfield, shares his first-hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Medical Emergency at Sea

How to deal with a medical emergency afloat   If you are planning a boating trip, it is important to have at least one...

Avoiding personal dangers at sea

In order to stay safe at sea, we need to know the risks we are facing and to be aware of any personal dangers we could possibly encounter. Here are six of the most common potential dangers individual crew members should be aware of.

The give-way hierarchy – sail boats and power boats

Who gives way to who at sea? Even seasoned sailors sometimes get this wrong and in a crowded harbour this can easily lead to a collision or at best considerable embarrassment for a boat that mistakenly thinks it has right of way over another.

Seasickness – how can you prevent it?

Seasickness is a common problem at sea and affects both seasoned sailors and novices. What are the causes and symptoms of seasickness?...

Steel and Aluminium Hulls

The two metals used for hull construction are steel and aluminium. These are both very strong materials and will last a long time as long as they are cared for, which primarily means protecting steel boats from rust and aluminium boats from electrolytic action.

2023 Rolex Fastnet Race – Part 3

This is our third and final article about the 2023 Rolex Fastnet Race. It is a first hand account by Simon Jollands who was one of the crew of Lancelot II, a Beneteau First 40 skippered by John Gillard.

Galvanic and electrolytic corrosion

Galvanic corrosion is an electrochemical reaction between two or more different metals, in the presence of an electrolyte (note salt water is a good electrolyte).

Boat surveys

A full boat survey assesses the condition of the hull, mechanical gear and means of propulsion. The survey is carried out with the boat...

Understanding tide tables and tidal curves

There are many factors that influence local tidal patterns and it’s essential for every sailor to have a good understanding of tide tables and tidal charts to ensure they can calculate the level of tide at any given time.

Safety Briefings – leave nothing to chance

Before giving your crew a safety briefing, it is worth considering the specific circumstances of the planned trip, the...

Repairing chips and dings in gelcoat

The gelcoat topsides of a GRP boat can be pampered and restored to their former glory relatively easily when it is ashore. Gelcoat is only a very thin outer layer of the hull, often less than 1mm thick, so you should avoid cleaning it with highly abrasive cleaners, or an-ything that could potentially damage its surface.

Top Tips For Learning: ColRegs Boating Rules Of The Road

Colregs Boating Rules Of The Road
The International Regulations for Preventing Collisions at Sea (COLREGs) are a set of rules designed to prevent collisions between vessels. They are essentially the “rules of the road” for boats. Some key concepts within the COLREGs include:

Common medical emergencies at sea

A medical emergency aboard a boat at sea requires immediate attention to ensure the safety of the casualty and the crew in general. The skipper needs to know which crew members, if any, have had medical training or have a first aid qualification. All boats should carry first aid handbooks to help an untrained crew cope with a medical emergency.

Boat Engine Failure – what to check

Engine failure If your engine fails or is overheating there are a number of things to check immediately: • Air filter...