Select Page

Boat engines come in all shapes and sizes and include inboards, outboards, petrol, diesel, electric and hybrid systems. Some engines are far more complex than others and should only be looked after by qualified engineers while others can be maintained fairly easily by a savvy boat owner.

Irrespective of what kind of engine a boat is equipped with and who does the work, the regular care and maintenance of a marine engine is essential. The most common cause of marine engine failure is widely known to be lack of maintenance.

Boat owners need to understand their boat engines as well as possible so that in the event of an engine failure at sea they will have some idea of how to fix the problem themselves.

Know your engine

Here are some thoughts about getting to know your engine. There are plenty of good illustrated reference books available on diesel engine maintenance and repair for boat owners as well as online forums and YouTube videos. While these reference sources may have lots of useful information about diesel engines in general they are unlikely to include specific information about your own make and model of engine. So although these are worth buying or taking a look at, the most important reference by far is a copy of the engine maintenance manual for your specific engine.

Engine manual

Boat engine manuals may be a little dull to read, but it really is the best place to find the essential information you will need when working on an engine.The engine manual should cover the following essentials:

  • Technical elements of the engine.
  • Maintenance and repair worksheets.
  • Recommended lubrication for engine and gearbox.
  • Common causes of breakdown and troubleshooting.
  • Winterising the engine.

In addition to these essentials, the engine manual will include other specific information like torque settings, how to bleed the fuel system, wiring diagrams and spare parts listings.

understanding boat engines_diesel boat engine

Engine manufacturers’ manuals tend to be full of commonly used technical terms that may not be familiar to all boat owners, so be prepared to spend a little time deciphering precisely what all these mean. They include terms like bore, stroke, compression ratio and specific fuel consumption. Here are a few common technical terms:

  • Bore – cylinder diameter.
  • Bottom dead centre (BDC) – a piston’s lowest position at the bottom of the downward stroke.
  • Compression ratio – the ratio of maximum cylinder volume at bottom dead centre to minimum cylinder volume at top dead centre.
  • Displacement volume – the total volume of all the cylinders in an engine (litres or cubic centimetres).
  • Four-stroke engine – completes a power cycle every four strokes.
  • Power – engine power or horsepower is the maximum power that an engine can produce, expressed in kilowatts or horsepower. In physics, power is defined simply as the rate of doing work.
  • Specific fuel consumption – the amount of fuel consumed for each unit of power output, eg the quantity of fuel in grams needed by the engine to produce 1 W/h (Watt per hour).
  • Strokeeither a phase of an engine’s cycle during which the piston travels from top to bottom or vice versa; or the type of power cycle used by a piston engine; or the stroke length, the distance travelled in the cylinder by the piston in each cycle.
  • Top Dead Centre (TDC) – a piston’s uppermost position or the end of the upward stroke.
  • Torque – a force that causes something to rotate, measured in Newton-metres or lb/ft.
  • Total Volume – the volume swept by a piston multiplied by the number of cylinders.
  • Two-stroke engine – completes a power cycle every two strokes.
  • Volume swept by the piston – the volume displaced by the piston between the top dead centre and bottom dead centre in cubic centimetres.

Engine tools

Keep a small dedicated toolkit for working on your engine to ensure you have the correct sized spanners and screwdrivers for maintenance purposes – this will save you a lot of time and avoid the frustration of spending ages hunting around for the correct tools to use.

Always choose good quality tools as although they will be more expensive they will last longer. Cheap tools have a habit of not fitting properly and quickly rust. Give some careful thought when buying tools – for example there is no need to buy a 200 piece socket set when you will only need 10 at most for your engine.

Here are some of the tools you will need:

  • Note: engines manufactured in Europe use metric sized spanners while engines manufactured in the USA use spanners sized in inches.
  • Spanners: open ended and ring spanners are both useful. Having both is advisable.
  • Socket spanners – these can be very useful when accessing fastenings in confined space.
  • Screwdrivers – flat blades and Philips head in several sizes, short and long handles. Also small socket type heads are very useful.
  • Adjustable spanners and mole grips – these are useful to have on board anyway but can come in handy when working on the engine.
  • Pliers – square-ended and long nose pliers.
  • Allen keys – essential to have on board, as are the socket types.
  • Hacksaw – a small hacksaw with spare blades
  • Hammer – occasionally invaluable.
  • Inspection mirror – a telescopic inspection mirror is very useful for locating fittings which are out of sight or awkward to reach.
  • Multimeter – every boat should have one.
  • Feeler gauges – a set will be required for checking alignments and precise settings.
  • Filter wrench – for removing used filters
  • Torque wrench – you will need this to tighten bolts according to the manufacturer’s specifications.

Tips:

  • I have two copies of the engine manual for my boat, one I keep on the boat and the other is at home.
  • Keep the engine and the engine bay as clean as possible. This will make it easier to spot any leaks in hoses and seals.
  • For those with little or no engine maintenance experience, the RYA diesel engine one day course is well worth doing. The course includes basic maintenance and engine care, explaining the basics of the four stroke cycle, cooling and air systems, engine electrics, winterisation and servicing. See www.rya.org.uk for information.

Essential Boat Spares for Safety

  Boats Spares Tool kit What you carry in the boats tool kit will be useful for many boat repairs, but you might want...

Dripless shaft seals

Dripless shaft seals are designed to completely stop water from entering a boat’s hull via the stern tube. There are two main types of dripless seals known as face seals and lip seals which many boat manufacturers now fit to production boats.

ColRegs Rule 14 – Head-on Situation

  ColRegs Rule 14: Head-on Situation (a) When two power-driven vessels are meeting on reciprocal or nearly reciprocal...

Steel hull maintenance

A steel boat owner’s biggest enemy is corrosion. You don’t have to worry about osmosis or rotting timbers, instead rust is the number one issue that will keep you awake at night.

Finding your way at sea: waypoints

Any sea voyage needs a certain amount of planning before it is undertaken. It makes sense to think about where you are going, how you will get there and what factors might influence your plan. Planning the route itself is also critical. One of the essential parts of modern navigation is the use of waypoints.

Boat Engine Safety Checks

  Boat Engine Safety Checks Every skipper needs to make regular essential boat engine safety checks. Below you will...

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 10 – The Return Trip

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the final instalment of a 10-part post where solo sailor, Bernie Branfield, shares his first-hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

ColRegs – avoiding collisions at sea

ColRegs - avoiding collisions at sea ColRegs Rule 8: Action to avoid collision (a) Any action taken to avoid collision shall...

Sailboat rig checks – Part 1

Sailing boat rigs need to be checked regularly to reduce the risk of rig failure at sea. In part one of Sail boat rig checks we run through a series of useful checks that owners and skippers can carry out.

Fire prevention on boats

  Fire prevention on boats - common causes of fire: • Smoking below decks • Galley cookers • Build-up of butane or...

Propeller care and maintenance

Propellers are complicated and repairs should be done by specialists but owners can carry out checks and some routine maintenance themselves when the boat is in the boatyard. A propeller is critical to a boat’s performance, fuel consumption and ride, so it makes sense to keep a propeller in good working order.

Sail trimming for cruisers

Sail trimming tips for cruisers. Whether racing or cruising, a well tuned boat will sail faster and tend to heel less than a boat with badly adjusted sails.

Essential Yachting + Power Boat Safety Briefing

Yachting Safety Briefing   Down below Lifejackets and harnesses - fitting, when to wear, clipping on Gas - risks,...

Essential Knots: Clove hitch

Essential Knots: Clove hitch Use: Tying a rope to posts, bollards, rings or a guardrail. Step 1. Make a turn around the object and lay...

How to improve a yacht’s upwind performance

There are several ways to improve the upwind performance of a sailing yacht. Read on for some useful tips including headsail reefing, heavy weather jibs and motor sailing.

Boating Rules of the Road – International ColRegs

    International ColRegs Rule 7: Risk of Collision Anyone who is responsible for a vessel at sea, from the...

The Round The Island Race 2023

This year’s Round the Island Race turned out to be a really thrilling and competitive event. 1100 boats entered the race, which took place on Saturday 1st July. The race started from the world famous Royal Yacht Squadron line in Cowes UK, with the largest and fastest boats starting first, leaving the rest of us to wait our turn.

How to predict wind direction and strength by reading a weather chart

Weather charts, also known as surface pressure or synoptic charts, contain a lot of information that helps weather...

Essential Knots: Reef knot

Essential Knots: Reef knot Use: Tying two ends of rope together, often used for tying up a bundle of loose sail around the boom. Step...

First Aid Afloat – fish spine injury

First Aid Afloat - Here is what to do if somebody stands on a fish spine: • Check for dangers. Is it safe for you to enter...

First aid at sea basics

At least one person on board should be trained in first aid and know how to administer the contents of the first aid kit, ensuring there are adequate supplies for the planned duration of the trip.

Essential Knots: Round turn and two half hitches

Essential Knots: Round turn and two half hitches Use: Tying a rope to a pole or a ring. Step 1. Pass the end around the object. Step 2....

Estimating and plotting your position at sea

This post covers how we go about estimating and plotting our position using traditional methods, when out of sight of land – covering Dead Reckoning, Estimated Position, Tidal Streams, Leeway and more…

A simple guide to understanding tides when passage planning

Understanding tides when passage planning When planning a trip in tidal waters, check the tides before going afloat. Use...

Sailing into a storm

Weather forecasting has become increasingly accurate, but despite this, I was caught out recently by a forecast that considerably underestimated the wind strengths and consequently was sailing single handed in to a Force 8 gale, which proved to be challenging!