Select Page

One of the greatest dangers a sailing yacht can encounter is fog. If fog is forecast, then most skippers will sensibly delay their departure until they are sure the conditions are clear. However, if fog begins to form when you are at sea it is important to be prepared and know what precautions to take. This will help to make your vessel detectable or visible in fog and keep the crew safe.

Types of fog

There are two main types of fog, usually referred to as land fog and sea fog.

Land fog, technically referred to as radiation fog, forms at night in clear conditions when the land cools rapidly, causing water vapour in the air to condense into tiny water droplets. Land fog normally lifts or disappears after the sun has risen but sometimes persists through the morning. This type of fog can be found along rivers and estuaries and sometimes extends one or two miles out to sea but it will soon disperse if the sea temperature is higher than the land temperature.

Sea fog, technically referred to as advection fog, is formed at sea and is more of a threat to sailors as it can last longer than land fog, needing a dry wind to disperse it. Sea fog is formed when moisture laden warm air flows over cold water. The warm air is cooled by the cold water beneath which results in the water vapour in the air condensing into tiny droplets.

Other types of fog include frontal fog and sea smoke. Frontal fog develops when warm air at the front of a depression rises over colder air, while sea smoke forms in arctic regions when very cold air flows slowly over a a layer of warmer air above the sea.

Preparation

A good first step to take is to study the prevailing weather in your sailing area in order to know what the conditions are like through the year and when different types of fog are likely to develop. For example in many areas, advection fog is more likely in spring when sea temperatures are at their lowest but air temperatures are rising.

Radar reflectors

Most larger leisure vessels and all commercial vessels are fitted with radar. Radar works by the transmitting and receiving of high frequency radio waves. The radar first sends out the radio waves which then reflect off all kinds of objects to a greater or lesser extent. The reflected waves are picked up by the receiver.

A large, tall, metal ship makes an excellent reflector and will be easy for the receiver to pick up. A small wooden or plastic boat will be almost impossible to detect unless it has a mast with a purpose built radar reflector attached. Radar reflectors are not expensive but are very effective and all small vessels should carry one. The higher the reflector is mounted, the more efficient it will be.

All small vessels should carry a foghorn with spare cannisters.

Sailing into fog

If you are sailing a yacht into fog there are a number of actions you should take.

  • Turn on the navigation lights.
  • Get the crew on deck and ensure everyone is looking out and listening for other vessels.
  • Put on lifejackets and clip on if the weather is rough.
  • Fog usually only occurs in a light wind, so consider running the engine very slowly to be able to manoeuvre instantly if necessary.
  • Partially furl in the genoa to help with forward visibility. Keep the mainsail hoisted as this will help make your vessel more visible to others.
  • Unless permanently mounted, hoist your radar reflector high into the rigging.
  • Make sure the liferaft is ready if needed.
  • Make sure the foghorn is ready and working.
  • Listen on VHF channel 16 or your local harbour channel if appropriate.
  • Plot your position on the chart.
  • Keep a regular check of your speed, course and position.
  • If your vessel is fitted with radar, an experienced crew member should monitor it until the fog clears.
  • Stop the engine at regular intervals to listen out for other vessels.

Collision avoidance

All skippers of small vessels should know the Collision Regulations which give instructions for vessels operating in restricted visibility including rain, snow and fog. Here is a reminder of which specific rules are appropriate for navigating in fog:

Rules 4-10

Section 1 of the Steering and Sailing Rules.

Rule 7b

Proper use shall be made of radar equipment if fitted and operational, including long range scanning to obtain early warning of collision and radar plotting or equivalent systematic observation of detected objects

Rules 11-18

Rules in this Section of the Steering and Sailing Rules apply to vessels in sight of one another.

Rule 19(a)

This Rule applies to vessels not in sight of one another when navigating in or near an area of restricted visibility.

   

Rule 19(b)

A power-driven vessel shall have her engines ready for immediate manoeuvre.

Rule 19(d)

A vessel which detects by radar alone the presence of another vessel shall determine if a close-quarters situation is developing and/or risk of collision exists.

Rule 19(e)

Except where it has been determined that a risk of collision does not exist, every vessel which hears apparently forward of her beam the fog signal of another vessel, or which cannot avoid a close-quarters situation with another vessel forward of her beam, shall reduce her speed to the minimum at which she can be kept on her course. She shall if necessary take all way off and in any event navigate with extreme caution until danger of collision is over.

ColRegs: Rules of the Road App: A quick reference tool featuring explanatory graphics with clear, concise descriptions

For Skippers & Crew of Sailboats, Power Boats and Commercial Vessels, Worldwide, the Safe Skipper ColRegs app enables the user to quickly interpret what other vessels are doing, who has right of way and what action they should take to prevent a possible collision.

Whether at sea or ashore, in daylight, darkness or poor visibility, simply open the app and search the rules in seconds to find the appropriate rule and definition.

 

 

 

Hourly Checks when sailing or motoring

  Hourly Checks Get into the habit of carrying out these checks and both yourself, your crew and your boat will be...

Essential Knots: Round turn and two half hitches

Essential Knots: Round turn and two half hitches Use: Tying a rope to a pole or a ring. Step 1. Pass the end around the object. Step 2....

2023 Rolex Fastnet Race – Part 2

Simon Jollands took part in the 2023 Rolex Fastnet Race. This is the second of his articles on the race aboard Lancelot II, a Beneteau First 40.

Galvanic and electrolytic corrosion

Galvanic corrosion is an electrochemical reaction between two or more different metals, in the presence of an electrolyte (note salt water is a good electrolyte).

ColRegs Rule 14 – Head-on Situation

  ColRegs Rule 14: Head-on Situation (a) When two power-driven vessels are meeting on reciprocal or nearly reciprocal...

You Need To Understand The IRPCS ColRegs To Pass Your Yachtmaster, Master of Yachts and Coxswain Certificate of Competence

IRPCS ColRegs Rules of the Road at Sea and Yachtmaster Learning, understanding and remembering the International Regulations...

First Aid Afloat – Jellyfish Stings

Jellyfish stings are a common occurrence when boating or swimming in many parts of the world. While most stings are not serious, some can cause...

Boat ownership

Owning a boat is a big commitment that should bring no end of satisfaction for the owner as well as the owner's family and friends. In...

Competent crew skills: mooring lines

Mooring lines are used when arriving or leaving a berth. One of the most important competent crew skills is to know how to...

2023 Rolex Fastnet Race – Part 3

This is our third and final article about the 2023 Rolex Fastnet Race. It is a first hand account by Simon Jollands who was one of the crew of Lancelot II, a Beneteau First 40 skippered by John Gillard.

Sailing Boat Rig Care

The rig of a sailing boat is put under huge stresses and strains so it is important for inspections of a yacht’s spars and rigging to be carried out at regular intervals.

Liferafts

Liferafts should be stowed where they are ready for immediate launching. All crew should know the location of the liferaft and know how to launch, inflate and board it. They should also know what equipment it contains.

Boat electrics

All boat owners should have a basic knowledge of electrics, both to avoid encountering electrical problems at sea and to stand a chance of solving them should they occur.

Going aground – what to do if it happens to you

When a yacht runs aground, it can be a stressful situation, especially on a falling tide in an exposed position with a swell running. There are several steps you can take to address the situation in order to ensure the safety of your vessel and its occupants. Here are some tips should this happen to you.

Rudders and steering systems – Part 3

In the third of our three blog articles on rudders and steering systems, we look at how to replace rudder bearings and repair a water-saturated core.

A simple guide to understanding tides when passage planning

Understanding tides when passage planning When planning a trip in tidal waters, check the tides before going afloat. Use...

Distress flares – which flare, how & when to use?

How to use distress flares at sea To effectively use distress flares at sea, you need to understand the different types, their purpose, and the...

Sail care and maintenance – Part 1

When thinking about the care, maintenance and repair of sails it helps to have some understanding of the properties of the ever growing range of modern sailcloth and the fibres they are made from, as opposed to the traditional canvas sails of the past.

Antifouling for leisure boats – Part 1

Boats that are kept afloat can very quickly become a home for small marine organisms such as barnacles, weed and slime. Applying an antifouling paint to your hull is necessary to protect it from these micro-organisms, as a fouled hull can cause problems and will slow down a boat’s maximum speed considerably if left unchecked.

Essential boat engine checklist

Boat engine checklist Engine oil level check Even if you have checked it previously, confirming the engine oil level is up...

Feeling anxious at sea

  Some people feel anxious at sea. Will they be seasick? What if they get caught in a violent storm? Could the boat...

Steel and Aluminium Hulls

The two metals used for hull construction are steel and aluminium. These are both very strong materials and will last a long time as long as they are cared for, which primarily means protecting steel boats from rust and aluminium boats from electrolytic action.

Repairing chips and dings in gelcoat

The gelcoat topsides of a GRP boat can be pampered and restored to their former glory relatively easily when it is ashore. Gelcoat is only a very thin outer layer of the hull, often less than 1mm thick, so you should avoid cleaning it with highly abrasive cleaners, or an-ything that could potentially damage its surface.

Rudders and steering systems – Part 2

One thing all rudders have in common is that they have three main parts that need to be checked: the rudder, or a steerable drive leg in the case of many power boats; the system that joins the rudder to the steering; the steering control itself.

Navigation safety: a quick-reference mobile app to learn the ColRegs NavLights and Shapes

 Safety at SeaSafety at sea will always remains a topical and important subject that will no doubt dominate the syllabuses of nautical...