Select Page

It is one of those sailing facts of life that, however hard you try to avoid it, sooner or later you will most likely find yourself aground. It has happened to me twice. Once when I was on a RYA training vessel near the entrance to Beaulieu River in the Western Solent, UK, on a rising tide. The second time when I was sailing single handed near the entrance to Chichester Harbour, on a falling tide. The first was easy enough to deal with, but going aground on a falling tide was a very unpleasant experience as I was stuck for six hours and concerned for the safety of my vessel.

When a yacht runs aground, it can be a stressful situation, especially on a falling tide in an exposed position with a swell running.  There are several steps you can take to address the situation in order to ensure the safety of your vessel and its occupants. Here are some tips should this happen to you. Remember that the steps to take in a grounding situation will vary according to the specific circumstances.

Safety of crew and vessel

The safety of your crew and the vessel is the number one priority. Ensure that everyone on board the vessel is wearing a life jacket. Quickly assign the crew specific tasks in order to save time and enable the vessel to be re-floated, if at all possible. These tasks include taking swift action, assessing the situation, calling for assistance and deploying a kedging anchor.

Take swift action

By taking appropriate swift action, you may be able to re-float the vessel immediately. If sailing, you may be able to quickly tack away at the first signs of a grounding, which you can feel under the keel. If you are able to tack, the vessel should heel as you do so and you may be lucky enough to get off. If this doesn’t work, try re-distributing weight, heeling the vessel or rocking it to safety. This has worked for me by positioning the crew at the bow which raised the stern and lifted us off. Also try distributing weight along the side deck which helps to heel the yacht, then motor in reverse away from the shallow water.

However, if the vessel is well and truly stuck fast, turn the engine off and assess the situation.

Assess the situation

You need to determine the extent of the grounding and evaluate if there are any immediate dangers, such as water ingress or structural damage. If there is an immediate risk of your vessel taking on water, it may be necessary to abandon the vessel so inflate a tender if you have one and prepare the life raft.

Call for assistance

If you are in a harbour, call the harbourmaster immediately, give them your position and request assistance. They will usually send someone out to see you as soon as possible and if necessary take passengers ashore to safety. Harbourmasters are trained to help vessels in difficulty and will provide guidance, help you deploy a kedging anchor, co-ordinate rescue efforts and may be able to tow your vessel clear if they arrive quickly enough.

If you are outside harbour or get no response from the harbourmaster, contact the coastguard immediately, notifying them of your position, number of people on board, sea state and any immediate dangers. They will co-ordinate rescue efforts if necessary and notify the nearest rescue vessels that can come to your assistance.

Use a kedging technique

If the vessel is not taking on water, you may be able to re-float it by using a kedging technique. This involves deploying an anchor in deep water away from the vessel and then winching it to safety. If help arrives quickly, pass them your anchor attached to a long line or the anchor chain if your vessel has an anchor winch. On a falling tide, wait until the tide has dropped completely and then you will be able to carry the anchor to the best position to enable you to pull the vessel off the shallows when the tide rises again.

Summary

Remember that when you are approaching shallow waters to be extra vigilant, especially on a falling tide. You should always keep a close eye on your depth gauge and have either an electronic and/or paper chart to help guide you. Give channel marks a wide berth, especially on low water springs. Passage planning is key, you should always know what the tide is doing and give yourself a good margin of safety.  And if it happens to you, remember to call the coastguard.

 

 

Feeling anxious at sea

  Some people feel anxious at sea. Will they be seasick? What if they get caught in a violent storm? Could the boat...

Essential boat engine checklist

Boat engine checklist Engine oil level check Even if you have checked it previously, confirming the engine oil level is up...

Dripless shaft seals

Dripless shaft seals are designed to completely stop water from entering a boat’s hull via the stern tube. There are two main types of dripless seals known as face seals and lip seals which many boat manufacturers now fit to production boats.

Competent crew skills: mooring lines

Mooring lines are used when arriving or leaving a berth. One of the most important competent crew skills is to know how to...

Antifouling for leisure boats – Part 1

Boats that are kept afloat can very quickly become a home for small marine organisms such as barnacles, weed and slime. Applying an antifouling paint to your hull is necessary to protect it from these micro-organisms, as a fouled hull can cause problems and will slow down a boat’s maximum speed considerably if left unchecked.

A simple guide to understanding tides when passage planning

Understanding tides when passage planning When planning a trip in tidal waters, check the tides before going afloat. Use...

Boat Engine Safety Checks

  Boat Engine Safety Checks Every skipper needs to make regular essential boat engine safety checks. Below you will...

Nautical paper charts – a reminder of the basics

The nautical chart is an indispensable tool for navigation. A chart is a graphic representation of an area of the sea which might also include coastlines, estuaries and islands. All cruising leisure boats should carry up-to-date paper charts.

Pre-start engine checks

According to the Royal National Lifeboat Institution (RNLI) almost one third of emergency call outs at sea are caused by mechanical failure. Many engine breakdowns are avoidable. The best way to avoid a breakdown is to carry out pre-start checks before heading out to sea.

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 8 – Arriving at the Azores

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the eighth of a 10-part post where solo sailor, Bernie Branfield, shares his first-hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Boat maintenance – what does it involve?

The maintenance of a boat involves things like cleaning, varnishing, painting, polishing, antifouling, servicing the engine, servicing the seacocks, and maintaining the gas and plumbing systems. It all amounts to a fairly considerable amount of work that can’t be ignored if you are to keep your boat in a safe and good condition.

How to trim a genoa sail

I recently had two new sails made by Sanders Sails, based in Lymington UK. The first to arrive was the new genoa and it took me a little while to get to know it and learn how to adjust it correctly. Here is an aide memoire for getting to know how to trim a genoa so that it will deliver the best performance.

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 4 – Navigation

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the fourth of a 10-part post where solo sailor, Bernie Branfield, shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Navigation safety: a quick-reference mobile app to learn the ColRegs NavLights and Shapes

 Safety at SeaSafety at sea will always remains a topical and important subject that will no doubt dominate the syllabuses of nautical...

Boat engine basics

Boat engines come in all shapes and sizes and include inboards, outboards, petrol, diesel, electric and hybrid systems. Some engines are...

Essential Boat Safety Briefing

Skippers Responsibilities Skippers are obliged to give a safety briefing to the crew even if they are a regular crew. At...

Competent crew skills: arriving and leaving a berth

Skilled boat handling is needed when entering or leaving harbour. Crew tasks include preparing the mooring lines and fenders before docking and...

Getting a tow for your sail or power boat at sea or on inland waterways

FREE tips from the Safe Skipper App for iPhone/iPad/Android: Getting a tow for your sail or power boat Plan how to secure a...

Seized fixings and fastenings

Maintaining a boat can be a rewarding experience but at times it can also be frustrating. A prime example of this is when you come across a seized fixing or fastening that refuses to budge. Read our tips on how to release and fix them:

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 6 – Communications

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the sixth of a 10-part post where solo sailor, Bernie Branfield, shares his first-hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Boat maintenance below decks

While most interior maintenance work can be done when a boat is afloat, some jobs such as servicing the seacocks have to be done ashore. It makes sense to do any major interior repairs and improvements with the boat hauled out in the boatyard.

Tools and spares for your boat

Tools and Spares to take to sea!

You won’t regret taking a look at our essential tips and checklist to make sure you’re prepared for routine maintenance and those unexpected jobs that come up whilst you’re afloat!

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 3 – Preparations

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the third of a 10-part post where solo sailor, Bernie Branfield, shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Safety Briefings – leave nothing to chance

Before giving your crew a safety briefing, it is worth considering the specific circumstances of the planned trip, the...

Docking a Motorboat

Docking a motorboat can be a challenging task, especially for beginners, but with practice and attention to detail, it becomes much easier. Here’s a step-by-step guide to help you dock your motorboat safely and efficiently.