Select Page

A liferaft is an essential piece of equipment to carry on offshore or coastal passages and should be regularly serviced by professionals according to manufacturers’ recommendations.

Liferafts should be stowed where they are ready for immediate launching. All crew should know the location of the liferaft and know how to launch, inflate and board it. They should also know what equipment it contains.

Types of liferaft

There are two international standards for liferafts – SOLAS and ISO 9650. SOLAS are heavier duty types and may not always be suitable for pleasure craft. There are two categories of ISO 9650 – “Type 1” for offshore navigation and “Type 2” for coastal navigation.

Skippers should ensure that their vessel is fitted with a liferaft that is designed to cope with the conditions they will encounter, is equipped accordingly and can accommodate all crew. Equipment will vary depending on whether the raft is specified for survival periods of less than, or more than, 24 hours. However, in all cases the equipment packed in the raft will be of only a very basic level. This is why it’s important to also have a grab bag of essentials available, as well as emergency water in a portable container.

Typical life-raft contents

Basic specification:
  • Two paddles.
  • 2 red hand flares.
  • Bailer and sponge.
  • Waterproof torch.
  •  
  • Lifesaving signal cards.
  • Floating knife.
  • Drogue (sea anchor).
  • Repair kit.
  • 6x seasickness tablets per person.
  • Rescue quoit with 30m floating line.
  • Top-up pump.
ISAF specification:

As above, plus:

  • Water pack.
  • Additional flares.
  • First aid kit.
  • Thermal protective aids.
  • Signalling mirror.
  • Seasickness bags.

Grab Bag

In the event of having to abandon ship, it is recommended to have a designated waterproof dry bag to carry essential emergency items. These might include items already in use on the boat, as well as some already stored in the bag.

Minimum grab bag contents include a handheld GPS, handheld VHF, PLB or EPIRB, flares, sea sickness pills, duplicate medication for any crew members that rely on regular medicinal drugs, torch and batteries, first aid kit, thermal protective aids, water, ship’s documents and personal documents such as passports.

It’s worth noting that the biggest dangers to survivors in a liferaft are from exposure and dehydration. Even in the height of summer, in north European and north American waters it’s possible to die from hypothermia within a few hours, so staying dry and having a suitable supply of warm clothes are the most important priorities.

McMurdo Liferaft

Next is the need for water – while it’s possible for a healthy adult to survive for a few days without water, deterioration is rapid. However, we can survive with no food for much longer – up to a month in some cases – so food is much lower on the priority list than is generally realised. By the same token, a means of signalling distress – ideally an EPRIB – should be very much higher on the list.

This is a summary of the minimum grab bag contents the International Sailing Federation (ISAF) recommends for vessels used offshore:

  • Flares: 2 red parachute, 2 red hand flares and cyalume-type chemical light sticks.
  • Watertight hand-held Electronic Position Fixing System (eg GPS).
  • SART (Search and Rescue Transponder).
  • Combined 406MHz/121.5MHz or type “E” EPIRB.
  • Water in re-sealable containers or a hand-operated desalinator plus containers for water.
  • Watertight hand-held marine VHF transceiver plus a spare set of batteries.
  • Watertight flashlight with spare batteries and bulb.
  • Dry suits or thermal protective aids or survival bags.
  • Second sea anchor for life-raft with swivel and >30m line diameter >9.5 mm.
  • Two safety tin openers (if appropriate).
  • First-aid kit including at least 2 tubes of sunscreen. Dressings should be capable of being effectively used in wet conditions. The kit should be clearly marked and re-sealable.
  • Signalling mirror.
  • High-energy food.
  • Nylon string, polythene bags, seasickness tablets (min 6 per person).
  • Watertight hand-held aviation VHF transceiver (if race area warrants).
  • Medical supplies including any for pre-existing medical conditions of any crew member.
  • Spare unbreakable spectacles for any crew members needing them.

How to read nautical charts

Whilst most sailors today rely on GPS to find their way at sea, nautical charts are a crucial tool for any sailor to navigate safely and effectively. Here is a reminder of some of the basic steps involved in reading a nautical chart:

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 10 – The Return Trip

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the final instalment of a 10-part post where solo sailor, Bernie Branfield, shares his first-hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Sailing to windward – how to take advantage of wind shifts

For most sailors, sailing upwind is the most exhilarating point of sail as you tack your way to your destination. Sailing to windward is a bit like zig-zagging your way up a mountain road through a series of hairpin bends – great fun but also calling for concentration and hard work.

Sailing Safely at Night – Best Practice

Sailing at night can be a magical experience – the peaceful solitude, starry skies, and gentle lapping of waves create an unforgettable atmosphere. However, nighttime sailing also presents unique challenges and risks that require careful preparation and vigilance. This comprehensive guide will cover essential safety practices to ensure your nocturnal nautical adventures are both enjoyable and secure.

Five dangers a vessel may encounter at sea

What are the main dangers a vessel may face at sea and what should skippers do to reduce the risk of these happening?

Nautical paper charts – a reminder of the basics

The nautical chart is an indispensable tool for navigation. A chart is a graphic representation of an area of the sea which might also include coastlines, estuaries and islands. All cruising leisure boats should carry up-to-date paper charts.

Pleasure craft safety equipment recommendations

Safety equipment is an important part of boat preparation and it is advisable for all pleasure craft skippers to check their vessel is...

Essential Yachting + Power Boat Safety Briefing

Yachting Safety Briefing   Down below Lifejackets and harnesses - fitting, when to wear, clipping on Gas - risks, precautions, gas bottles and...

Wooden Hull Repairs

While wooden boat hull maintenance is mostly straightforward, it is always a good idea to take expert advice on any repair job needed doing to a wooden boat, unless you have done the job before and know what you are doing.

Distress flares – which flare, how & when to use?

How to use distress flares at sea To effectively use distress flares at sea, you need to understand the different types, their purpose, and the...

Sail care and maintenance – Part 1

When thinking about the care, maintenance and repair of sails it helps to have some understanding of the properties of the ever growing range of modern sailcloth and the fibres they are made from, as opposed to the traditional canvas sails of the past.

Essential Knots: Figure of eight

Essential Knots: Figure of eight Use: Stopper knot, prevents a rope from being pulled through a hole e.g. through a block or...

Seasickness – how can you prevent it?

Seasickness is a common problem at sea and affects both seasoned sailors and novices. What are the causes and symptoms of seasickness?...

Rudders and steering systems – Part 3

In the third of our three blog articles on rudders and steering systems, we look at how to replace rudder bearings and repair a water-saturated core.

Repairing a leaking hull-to-deck joint

If you suspect a hull-to-deck joint has failed, then being absolutely sure where the actual leak is occurring is of prime...

Keel design – options to consider when choosing a yacht

Keel design is constantly evolving and nowhere is this more apparent than in modern racing yachts such as the Imoca Open 60...

Rudders and steering systems – Part 1

Rudders and steering systems. A rudder is one of the most critical parts of a boat. Rudder failure is a common occurrence on neglected or overworked boats and a very unpleasant and potentially dangerous thing to happen when you are out at sea.

Cleaning & polishing painted topsides

The gelcoat topsides of a GRP boat can be pampered and restored to their former glory relatively easily when it is ashore. Gelcoat is only a very thin outer layer of the hull, often less than 1mm thick, so you should avoid cleaning it with highly abrasive cleaners, or an-ything that could potentially damage its surface.

Rewiring a boat – overcoming the challenges involved

Skippers need to have a basic knowledge of boat electrics, to avoid potential problems and to be able to solve them when they happen.

Narrowboating on the Kennet and Avon Canal

A recently cancelled sailing event I was due to take part in left us with a free weekend in the diary. Given that my wife and I were celebrating a bumper wedding anniversary and the weather forecast was for fine weather, we decided to hunt around for a last minute canal holiday.

Cleaning & polishing gelcoat topsides

The gelcoat topsides of a GRP boat can be pampered and restored to their former glory relatively easily when it is ashore. Gelcoat is only a very thin outer layer of the hull, often less than 1mm thick, so you should avoid cleaning it with highly abrasive cleaners, or an-ything that could potentially damage its surface.

Docking a Motorboat

Docking a motorboat can be a challenging task, especially for beginners, but with practice and attention to detail, it becomes much easier. Here’s a step-by-step guide to help you dock your motorboat safely and efficiently.

2023 Rolex Fastnet Race

Safe Skipper’s Simon Jollands took part in the 2023 Rolex Fastnet Race – a classic offshore sailing event. This is the first of several articles on the race and focuses on the start.

Steel and Aluminium Hulls

The two metals used for hull construction are steel and aluminium. These are both very strong materials and will last a long time as long as they are cared for, which primarily means protecting steel boats from rust and aluminium boats from electrolytic action.

Sector lights, directional lights, leading lights – how do they differ?

Sector lights, directional lights and leading lights guide vessels safely through hazardous waters or narrow channels at...