Select Page

This is our third and final article about the 2023 Rolex Fastnet Race. It is a first hand account by Simon Jollands who was one of the crew of Lancelot II, a Beneteau First 40 skippered by John Gillard.

The Fastnet Race is named after the Fastnet Rock, which the course rounds after 356nm (nautical miles) from the start of the race in Cowes, UK. The rock is the most southerly point of Ireland, 4nm southwest of Cape Clear Island, 8nm from the Irish mainland and 170nm from Land’s End, the most westerly point of mainland England.

Passing Land’s End

Lancelot II sailed past Land’s End on the morning of 24 July, 45 hours after the start of the race. We were making good progress into a steady southwesterly breeze, averaging speeds of 7kts.  After all the hiatus at the start and the brutal conditions we faced in the first 24 hours of the race, the whole experience as we approached Land’s End was completely different. There were few yachts in sight, the sea state was moderate and it felt like we had the ocean to ourselves.

While near the coast, when our phones had signal, we could keep an eye on how other competitors were doing by using the YB Tracker mobile app. All boats have to carry a YB Tracker unit for the race. We could also monitor progress on the boat’s chartplotter which had a built-in AIS, the automatic identification system that uses transceivers to track vessels at sea. One of the many offshore racing regulations dictated by the organisers of the race, the Royal Ocean Racing Club (RORC) and World Sailing is that all vessels taking part have to be equipped with AIS transponders.

Team spirit

By now all nine crew members had become accustomed to the watch system, though some found this harder to get used to than others. The team spirit was excellent, there was a non-stop flow of tea, soup, pot noodles and snacks, with everyone taking turns boiling the kettle and helping out. Meal times were also very well organised. We had brought frozen lasagnes, curries and stews which we heated up in the galley and then served in stainless steel dog bowls. These proved far more user friendly than land based crockery and prevented hot food from going everywhere in the lumpy seas.

The Celtic Sea

After we rounded Land’s End there was a growing sense of anticipation that we would soon be heading out across the Celtic Sea to the iconic rock and its famous lighthouse. This would surely prove to be a photo opportunity like no other.

We knew from the forecasts and pre-race weather briefing that there was another weather front due to approach us from the northwest. Would it hit us before we rounded the rock? When would the wind shifts come?  Our skipper John’s considerable skill and experience really counted here, he was continually thinking ahead and plotting the best course that would take account of the predicted conditions – his navigation skills and tactical awareness proved invaluable.

Another race rule is that all competitors must not enter areas designated as Obstructions, including all Traffic Separation Schemes (TSS). One of these is a 200 square mile area west of Land’s End which lies right in the way of a direct route to the Rock. We chose to avoid this by heading northeast up the Cornish coast before we could alter course northwest towards the Rock, rather than going west of the TSS. The swells increased significantly after Land’s End and it was quite some time before we changed course and headed out into the Celtic Sea.

Becalmed

Fully expecting conditions to deteriorate, it was something of a surprise to all of us that the next day the wind dropped completely, the clouds almost disappeared and we found ourselves in a flat calm. The afternoon of 25th July was warm and there we were halfway across the Celtic Sea 80nm from land in teeshirts and shorts. On went the music and there was not much left to do except enjoy the sunshine.

We encounter a problem

While everyone began to relax Chris (aka Obelisk) happened to look up the mast and noticed that something didn’t look quite right near the top of the track. One of the sliders had come adrift and a batten was poking out of the mainsail. Without hesitation we decided to lower the main and take a closer look. We set about this but soon discovered that the main would not budge and was not going to come down. Suddenly this was serious. We needed to rectify this before the wind picked up again. The first thing to do was to send someone up the mast to inspect the problem at close quarters. It was decided that 19 year old Adam would go aloft in the bosun’s chair and within a few minutes everyone was focussed on helping. Over the next hour he went up, then back down to collect some tools and then back up again. He was now able to take the slider off completely and push the batten back into the sail to allow the sail to be lowered. Thanks to Adam’s efforts we managed to get the mainsail down and carry out an effective repair on the deck.

To say this was a piece of luck would be an understatement as not only did Obelisk spot the problem in the first place, but he did so in flat calm conditions which meant sending someone aloft was not too hazardous – it would have been quite a different story in a blow.

Rounding the Fastnet Rock

A little while later we were on the move again, making slow progress across the Celtic Sea. We sailed into the night, changing watches every three hours with everyone doing their best to keep the boat going as fast as possible. The closer we got to the Rock the slower we seemed to go. Added to this it was a very dark night and the visibility became worse. On a clear night the Fastnet light can be seen from 18nm away. As we slowly approached it there was no sign of the light and so we needed to rely on instruments to ensure we were on the right course. This included using the Navionics app which I had on my iPhone and proved to be a great help. Eventually, at 05:40hrs on 26 July, out of the gloom we noticed a dark triangular shadow two or three hundred metres away. Even at this close distance we could only just make out the light through the fog. It was not exactly the moment of extreme elation we had eagerly anticipated, but there was no question we had found it. Now all we had to do was navigate our way around the rock and head back the way we had come from.

        

Surfing across the Celtic Sea

My wife Clara had made us a rum soaked fruit cake which we saved to celebrate the rounding of the rock. This cake was swiftly devoured and tasted exceptionally good even at 06:00hrs.

As soon as we rounded the rock the wind miraculously seemed to pick up and within an hour or so we were bombing along at 9kts with the wind behind us and all feeling great. The sea state also changed quite rapidly and our speed picked up even more, reaching 13kts as we surfed down the waves. Now we were heading towards the Scilly Isles and the skipper was hoping for a 200 mile day, the best yet.

We had a minor calamity during the charge down the Celtic Sea when the mast and cockpit instruments, including the digital compass, began malfunctioning. To make things worse Hereward, who was helming at the time, had a nasty fall onto the cockpit’s instruments, including the digital compass, breaking them in the process. It was a spectacular crash but luckily he was alright.

During daylight this didn’t present too much of a problem as we still had the bulkhead compass for the helm to steer by. However at night it was a different story as the bulkhead compass light had failed. Luckily I had a powerful head torch with a long life battery that could hold its charge through the night. We rigged this up so it would illuminate the compass and this arrangement worked fine.

The final leg

By the next morning we were back in the English Channel, having left the Scilly Isles to port during the night of the 27th. At 07:00 on 28 July we were passing Alderney to starboard, continuing to make very good progress towards Cherbourg. We were now well and truly on the final leg, we had the spinnaker up and were enjoying some exceptional sailing.  This was such a contrast to the start of the race. At 12:09 on 28 July we crossed the finish line outside the entrance to Cherbourg-en-Cotentin, France. We were all absolutely elated to have successfully finished the Fastnet Race, coming 42nd in IRC 1B and 188th in IRC Overall. Needless to say we had a fabulous celebration when we finally made it ashore.

Electric motors and hybrid systems

In recent years there have been considerable advances with the development of electrically powered propulsion in the leisure marine sector. This includes developments with inboard and outboard electric motors, hybrid systems, lithium-ion battery technology as well as solar, wind and hydro powered generators.

Anchoring – getting it right

If you can set an anchor correctly with confidence and know your boat will be safe in a secure anchorage, then you can rest in comfort and will not...

Seasickness – how can you prevent it?

Seasickness is a common problem at sea and affects both seasoned sailors and novices. What are the causes and symptoms of seasickness?...

Boat surveys

A full boat survey assesses the condition of the hull, mechanical gear and means of propulsion. The survey is carried out with the boat...

Keel maintenance and Repair – Part 2

If you have ever witnessed a boat colliding with a rock or other submerged obstacle you will know that there is an almighty thump and the whole boat shakes and judders. While such hard groundings seldom result in catastrophic keel failure, something has to give and even the sturdiest keels can easily be damaged by such an impact.

Essential boat engine checklist

Boat engine checklist Engine oil level check Even if you have checked it previously, confirming the engine oil level is up...

Competent crew skills: arriving and leaving a berth

Skilled boat handling is needed when entering or leaving harbour. Crew tasks include preparing the mooring lines and fenders before docking and...

Understanding boat engines

Irrespective of what kind of engine a boat is equipped with and who does the work, the regular care and maintenance of a marine engine is essential. The most common cause of marine engine failure is widely known to be lack of maintenance.

Dag Pike’s Boat Survey

We're really pleased to be working with Dag Pike on some great new apps for iPhone & Android. Here'a a bit more about the first app: Dag Pike's...

Sailboat rig checks – Part 1

Sailing boat rigs need to be checked regularly to reduce the risk of rig failure at sea. In part one of Sail boat rig checks we run through a series of useful checks that owners and skippers can carry out.

How diesel engines work

The basic principle of a diesel engine is less complex than that of a petrol engine. No spark plug or ignition system is needed, making the basic diesel engine a comparatively straightforward system that results in fewer faults and has lower maintenance costs than a petrol engine.

Passage planning and pilotage

Passage planning and pilotage help skippers navigate safely from one port to another. A passage plan takes into account all...

Repairing chips and dings in gelcoat

The gelcoat topsides of a GRP boat can be pampered and restored to their former glory relatively easily when it is ashore. Gelcoat is only a very thin outer layer of the hull, often less than 1mm thick, so you should avoid cleaning it with highly abrasive cleaners, or an-ything that could potentially damage its surface.

Fixing position at sea using traditional methods

This post looks at some traditional methods used for fixing a vessel’s position at sea, within sight of land. Electronic fixes using chart plotters are very straightforward to record, but if for some reason a vessel’s electronics are faulty it is essential that a skipper knows how to use traditional methods.

VHF DSC radio – how best to communicate at sea

There are many ways to communicate with others at sea. What makes the VHF DSC radio the best form of short range...

Sail care and maintenance – Part 1

When thinking about the care, maintenance and repair of sails it helps to have some understanding of the properties of the ever growing range of modern sailcloth and the fibres they are made from, as opposed to the traditional canvas sails of the past.

Essential Boat Buying Tips for First-Time Boat Owners

The first question that comes to mind when thinking about buying a boat is: what type of boat? There are more than 20 different kinds, of different sizes, for different purposes, and different pockets. So, your first step is to decide your boat type.

Sailboat rig checks – Part 2

In part two of Sail boat rig checks we run through some useful rig maintenance tips and then finish with a brief look at what a professional rig check involves.

Marine engine oil system maintenance

The regular maintenance of a marine diesel is key to preventing engine failure at sea. This means doing regular checks of the fuel, cooling, electrical and oil systems.

Learn ColRegs: Traffic Separation Schemes

Learn ColRegs Rule 10: Traffic Separation Schemes. (c) A vessel shall, so far as practicable, avoid crossing traffic lanes...

Dripless shaft seals

Dripless shaft seals are designed to completely stop water from entering a boat’s hull via the stern tube. There are two main types of dripless seals known as face seals and lip seals which many boat manufacturers now fit to production boats.

Rudders and steering systems – Part 1

Rudders and steering systems. A rudder is one of the most critical parts of a boat. Rudder failure is a common occurrence on neglected or overworked boats and a very unpleasant and potentially dangerous thing to happen when you are out at sea.

How to trim a genoa sail

I recently had two new sails made by Sanders Sails, based in Lymington UK. The first to arrive was the new genoa and it took me a little while to get to know it and learn how to adjust it correctly. Here is an aide memoire for getting to know how to trim a genoa so that it will deliver the best performance.

Boat electrics inspection checklist

With the boat ashore, here are some recommendations for carrying out a boat owner electrics inspection. Safety is always paramount so remember to do the checks with the batteries off. Wearing a head torch helps, make notes as you go and only tackle a repair if you are 100% sure you know what you are doing:

Seized fixings and fastenings

Maintaining a boat can be a rewarding experience but at times it can also be frustrating. A prime example of this is when you come across a seized fixing or fastening that refuses to budge. Read our tips on how to release and fix them: