Select Page

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility.

 

The Jester Challenge was created for skippers of small boats who want to test their skill and self-reliance, is a uniquely successful experiment in single-handed ocean sailing. This site tells you everything you need to know about it: its history, philosophy, guidelines and future events, along with the views and experiences of skippers who have taken part over the years.

There is a Challenge every single year and new skippers are always welcome. If you like the idea of developing your offshore seamanship in a relaxed and supportive environment, visit the Jester Challenge website. 

This is the seventh of a 10-part post where solo sailor Bernie Branfield shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa. You can read more about Bernie at the end of the post.

Why do I want to try and sail across the Atlantic? I don’t remember a time when I haven’t wanted to, other challenges such as ‘round the world’ or ‘north west passage’ don’t appeal as much as tackling the North Atlantic and never have. I cannot explain it, but since finding out that it was possible in a modest production boat I have had it in my sights. I was surprised to find out that the number of people who have successfully completed a single-handed passage of the North Atlantic, crossing from the UK to NE USA, passing North of the Azores, is estimated to be less than 1,000 people, a fraction of the number who have climbed Everest. This year there have been around 10 single-handed crossings and this was a busy year for events! There is a reason for this, the route is against the prevailing weather and current. Also, the weather is notoriously volatile with frequent storms and the additional hazards of ice and fog in the North Eastern phase of the crossing.

The Jester Challenge presents an ideal context within which to attempt this passage and my preparations over the past five years were focussed towards the full Jester Challenge to Newport in Rhode Island. I believed I had the right boat and the best opportunity considering my age, health and life situation. I became committed to this year’s event when I got my USA B1/B2 visa which had taken almost 10 months.

I derive a great deal of fulfilment from planning and preparing for sailing trips in my various old, scruffy and cheap boats. Seamanship and prudence coupled with the satisfaction of doing more with less motivates me, as does the post adventure glow of making it home safely. Sailing, meeting people and encountering nature are significant factors in choosing adventures. A specific destination is a secondary consideration to the adventure, I would have been just as happy to aim for Boston or New York.

Photo credit: Graeme Shimwell

Getting to the start line was relatively easy as I had started preparations in plenty of time but I was aware that I hadn’t completed a 500nm offshore passage as suggested by the guidelines. Such a passage is not easy to achieve on the East Coast as it is a least two days to a suitable setting off point and then the passage is across the North Sea which is very different to the North Atlantic.

At the start point in Plymouth I was extremely nervous and I am convinced that this stress manifested itself as mild seasickness for the first few days. The first day was a great start but day 2 was a shock to the system. My motivation took a big hit as I encountered the sea state left by the depression that had been stationary off the West Irish coast for a few days. To counter this I retreated and sailed south before I tried going west again. I found it difficult to get into a sailing rhythm and establish a routine. The schedule of taking sun sights and downloading weatherfax transmissions helped with this but I spent much of the time in my bunk reading. In the heaviest weather I hove to, in reality the maximum wind speed was probably force 9 but the sea state was significant, regularly encountering swell and waves totalling 9m with a shortish period between peaks that caused the boat to slam and bounce alarmingly. Although I had the boat under control and safe and I was able to rest, being hove to resulted in no progress or being driven backwards so was a negative factor in my state of mind.

My morale hit a low when I encountered the second weather system. This was after being becalmed in the bay of Biscay and making very little westerly progress. A combination of lack of progress, the tough conditions and discovering a problem with the boat exacerbated the situation. Whilst I was setting a reef in the main sail during the night I found that a lower stay had lost tension. Thoughts that went through my mind were mostly rational but the overriding thought was that I could lose the mast. With the sails stowed I waited for daylight to assess the situation. All four lower stays seemed slack but only one seemed very slack. This was difficult to assess as the boat was bouncing around a fair bit. I determined to try sailing but under reduced canvas. With a small jib set (about 5 turns unfurled) I managed to make some progress but I needed to work out how to manage the situation. Tightening stays in open water, especially when sailing, is very dangerous as any slack that is taken in can either lead to over tensioning the rig or accelerate the onset of the problem. As it turned out it was a good thing that I didn’t apply any addition tension as a swageless fitting was slipping and adding tension would increase the chances of the fitting failing. It was at this time that I received a message that for some reason settled my nerves, gave me hope of a positive outcome and reminded me that I was not alone. The message had nothing to do with the rigging as I had decided to not worry anyone with this news until I had a better handle on it. My motivation improved as I found that I could set sail with an extra reef in without putting undue stress on the rig. Where normally I would sail with 2 reefs I was now sailing with 3 reefs. This had two effects; my westwards progress was hampered as I could only get within 70 degrees of the wind but the boat didn’t slam into the sea so much. Things became more comfortable but progress towards Newport became almost negligible. It was at this point that I decided to head for safety so that I could assess the rigging problem and consider my options. Closest land was A Coruna in Spain, the Azores was still over 600nm away. I determined to give it a day of trying to make progress towards the Azores and then review my plan. Practical steps that I took to deal with the rigging issue included fitting cable grips to the stays just above the swageless fittings, adding lashings to the secure the cable grip to the deck fitting, taking the main and jib sheets into the cabin so that I could release them quickly if I detected a change. This all occurred around day 10. The worry created by the rigging situation and lack of progress seemed to make me feel seasick again.

By day 14 I was 600 nm from the Azores and progress in that direction, although very slow, seemed possible.

I resigned myself to slow progress but when I became becalmed yet again on day 17, my state of mind took a severe dip as the boat appeared to be shaking itself to bits in the slack swell. Ignoring the Jester rules I used the engine to stabilise things and get out of the centre of the high pressure I had ended up in. On day 19 I had the best day of the whole passage. I was surrounded by dolphins in the morning for about an hour, long enough to video them from the bow. Again in the evening I had dolphins, probably the same pod, and they came back after the sun went down. In the dark the light show that their activity generated in the phosphorescence was incredible.

Food was not a consideration in terms of motivation when I was planning the trip. This was a mistake, I took some treats, mainly sweets and hot chocolate drink but they were relatively ineffective in terms of improving morale. Fresh fruit played a part and when the oranges ran out on day 15 I missed this part of my diet. I got bored with much of the food and don’t want to have to eat TVP for a while but sardines are amazing and I didn’t tire of eating them. Knowing what I know now, fresh veg and the ability to cook with them will form part of my future adventures. Corned beef hash was great but the quantities from a standard tin of corned beef made it a bit overwhelming; three meals of corned beef on consecutive days was challenging. Plain water, especially water treated with aquatabs, was hard to consume, the addition of orange flavoured vitamin tablets helped. At the start I struggled to ingest 2 litres of water a day in drinks and cooking. Rehydration tablets were vital and provided a good pick-me-up. The best short term motivational consumable was a nice cup of tea after completing a task such as reefing, navigation, messages etc.

As I approached Terceira I was determined to make a landfall at Praia do Vitoria so stayed up all night hand steering. By day break the wind had got up and the low that was to my North West started heading me so I was gradually pushed south of my intended route. I kept going as the sea state built up until I was south of Terceira and then I headed for Angra do Heroismo, engine on and making 1.5 knots into the wind and waves. This was ideal for arrival at first light. The auto-helm couldn’t maintain a course in the sea state so it was another night of hand steering. When I dropped anchor in the bay at Angra it was with tremendous relief but relatively little sense of achievement. Slowest passage to the Azores that I am aware of, intended destination some 2,500 nm away or 7 weeks at current rate of progress and a problem with the boat. The problem with the boat’s rigging was doubly de-motivating because I had identified the issue before I set off, bought the parts to deal with it but for some reason hadn’t got round to it. Once I had overcome my frustration and embarrassment of this situation it turned into a positive as I had all of the parts onboard to rectify the situation including a Loos gauge to check tension. Morale and state of mind rocketed when I made it onto the marina, people were so helpful and the achievement of an offshore passage had started to sink in but I was exhausted.

If this had been a coastal cruise there were times when I would have dropped the anchor and waited for things to improve, that isn’t an option offshore. I just had to keep on going and this in itself is a mixed blessing as far as motivation is concerned. I was forced to keep going, even if it was to a destination I hadn’t chosen and the thought of turning back or heading to Spain was demoralizing. As it became clear that I wouldn’t make it to the USA but the Azores looked to be a real possibility my motivation improved. There was a day when nothing went to plan, during the day I was both hove to and pushed backwards. I fell over getting back into the cockpit and damaged the main steering compass. To break the sequence I hove to, got into my bunk and slept.

I was expecting the encouragement and concerns of people ashore to have an influence on my motivation. This turned out to be limited and apart from restricting the detail of my situation in my messages there were only a couple of occasions when communications had a significant impact on my morale. Forecast wind speeds were, at times, significant under estimates of what I was experiencing and this was disheartening. At no point did I consider the progress of other challengers or what people would think of where I might end up. Later, I discussed my passage with a very experienced couple who I met in the Azores and they didn’t think I was a natural single handed sailor. Initially this was a bit of a knock but when I analysed it they were correct. More than about three weeks away from people and society exceeded my threshold for isolation.

I was expecting some highs and lows on the trip but not the depth of the low of being ground down by the sea state and the rigging problem. Upon reviewing my log I had one day when everything seemed to be against me and this was a day when I had hoped to make progress but the sea state was such that progress wasn’t possible. I reckon I had three good days out of 25. Day 1 was a great start, day 19 with the dolphins and reasonable progress was the best day. Day 11 was also good as that is when I first considered going to the Azores and I overcame my initial fear that the mast was about to fall down.

Am I motivated to have another go? It is too early to say if I would attempt the full North Atlantic challenge again but I would definitely set off for the Azores at the next opportunity.

About Bernie Branfield

I have been sailing since I was 7, I started in Mirror dinghies at the local gravel pit and made my way up to VLCCs for a large oil company as Third Mate. After a break for family life I bought a MacWester Rowan 22’, Chantilly, which I sailed to Holland, Belgium, France and Ireland as well as around the UK East Coast. I still have Chantilly. For a short time I owned an Achilles 24, Mischief, that I had hoped to sail to the Azores but abandoned this plan after an eventful trip back from Ireland. My current boat is an Invicta 26’ Mk2, Louisa, which I bought just before the Covid lockdown. Due to timing, work commitments and various other factors I decided to enter the 2022 Jester Challenge to Newport Rhode Island. When I am not sailing my own boat I try and crew on a yacht delivery each year to build up experience. I have around 30,000 sea miles in yachts and various qualifications including YM Offshore under my belt. Louisa was built in the early 1970s and suits my singlehanded sailing needs to a tee, she is moored at Hoo Ness Yacht Club on the River Medway in Kent.

Fixing position at sea using traditional methods

This post looks at some traditional methods used for fixing a vessel’s position at sea, within sight of land. Electronic fixes using chart plotters are very straightforward to record, but if for some reason a vessel’s electronics are faulty it is essential that a skipper knows how to use traditional methods.

Sterndrive maintenance

Sterndrives are a popular form of propulsion in the powerboat market, but require a fair amount of care and maintenance. The main factors to be aware of are salt water corrosion, lubrication and regular inspection of the bellows, the condition of which is vital to prevent water from entering into the hull.

Right boat vs Wrong boat – Over 30 Ways to Cut the Cost of Your Sailing and Cruising

Sailing and cruising offer unparalleled freedom and adventure, but they can quickly become costly. Fortunately, there are numerous strategies to help you enjoy the open water without breaking the bank. Here are over 30 practical ways to cut your sailing and cruising costs.

Antifouling for leisure boats – Part 2

To prepare for antifouling, as soon as your boat has been lifted out and pressure washed, you need to check all the surfaces of the hull below the waterline, remove any remaining barnacles and check for blisters.

Points of Sailing

The course on which a boat is sailing can be described by its angle to the wind, not to be confused with its compass...

ColRegs Nav Lights & Shapes, Rules Of The Road and IALA Buoys Apps

ColRegs Nav Lights & Shapes, Rules Of The Road and IALA Buoys Apps Make Learning Rules on iPhone, iPad, iPod and Android...

Marine engine electrical system

The typical basic electrical system associated with a marine engine includes a dedicated engine starting battery, a starter motor, a charger in the form of an alternator, a solenoid and some engine sensors and instruments.

Sailing into fog – being prepared and staying safe

Most skippers will sensibly delay their departure, if fog is forecast. However, if fog begins to form when you are at sea it is important to be prepared, and know what precautions to take, to help make your vessel detectable or visible in fog and keep the crew safe.

Rudders and steering systems – Part 2

One thing all rudders have in common is that they have three main parts that need to be checked: the rudder, or a steerable drive leg in the case of many power boats; the system that joins the rudder to the steering; the steering control itself.

Gybing a sailing boat

Gybing is the sailing manoeuvre used to change a boat's direction through a following wind. As with the tacking manoeuvre,...

Sector lights, directional lights, leading lights – how do they differ?

Sector lights, directional lights and leading lights guide vessels safely through hazardous waters or narrow channels at...

Boat batteries

Under-sized battery banks are one of the key factors behind power failure at sea, as well as the premature failure of batteries, so make sure that your boat battery measures up to the use you want to put it to.

Liferafts

Liferafts should be stowed where they are ready for immediate launching. All crew should know the location of the liferaft and know how to launch, inflate and board it. They should also know what equipment it contains.

Essential Knots: Round turn and two half hitches

Essential Knots: Round turn and two half hitches Use: Tying a rope to a pole or a ring. Step 1. Pass the end around the object. Step 2....

Boat interior inspection and checks

While a boat is ashore, the most critical interior checks to carry out are those that concern the safety of the boat. This entails the integrity of all through-hull fittings and seacocks, the gas system and the electrical system.

How to read nautical charts

Whilst most sailors today rely on GPS to find their way at sea, nautical charts are a crucial tool for any sailor to navigate safely and effectively. Here is a reminder of some of the basic steps involved in reading a nautical chart:

Tips and advice for staying safe on a sailboat at sea

Here we focus on how to stay safe on a sailboat at sea. We cover key things to ensure you have on board before you set sail as well as covering the most common cause of incidents on sailboats and how to deal with them.

Safety Briefings – leave nothing to chance

Before giving your crew a safety briefing, it is worth considering the specific circumstances of the planned trip, the...

Boat maintenance below decks

While most interior maintenance work can be done when a boat is afloat, some jobs such as servicing the seacocks have to be done ashore. It makes sense to do any major interior repairs and improvements with the boat hauled out in the boatyard.

DIY boat upgrades: Budget-friendly projects to enhance your (older!) boat

DIY projects that can enhance both the functionality and aesthetics of your boat. In this article, we’ll explore a variety of DIY boat upgrades that won’t break the bank but will significantly enhance your boating experience.

Sailboat rig checks – Part 2

In part two of Sail boat rig checks we run through some useful rig maintenance tips and then finish with a brief look at what a professional rig check involves.

Going aground – what to do if it happens to you

When a yacht runs aground, it can be a stressful situation, especially on a falling tide in an exposed position with a swell running. There are several steps you can take to address the situation in order to ensure the safety of your vessel and its occupants. Here are some tips should this happen to you.

The give-way hierarchy at sea – who gives way to whom?

Whatever their size or type, all skippers have a responsibility to avoid collisions with other boats at sea.  It is...

Repairing chips and dings in gelcoat

The gelcoat topsides of a GRP boat can be pampered and restored to their former glory relatively easily when it is ashore. Gelcoat is only a very thin outer layer of the hull, often less than 1mm thick, so you should avoid cleaning it with highly abrasive cleaners, or an-ything that could potentially damage its surface.

Electric motors and hybrid systems

In recent years there have been considerable advances with the development of electrically powered propulsion in the leisure marine sector. This includes developments with inboard and outboard electric motors, hybrid systems, lithium-ion battery technology as well as solar, wind and hydro powered generators.