Select Page

Effective crew briefings are a vital part of the good on-board communication that helps everything to run smoothly on a sailing vessel at sea, whether it is cruising or racing.

Involving everyone on board, including children, with sailing a boat will make the experience more satisfying for all and will also maximise the chances of remaining a motivated team if conditions start to get tough. This process starts with a safety briefing before departure, which is especially important for crew who have not sailed on the vessel before.

When underway it is also important to get into the habit of briefing everyone before each manoeuvre takes place. When hoisting the mainsail, if everything goes perfectly it may feel as though it’s easier to just get on with doing it yourself, however, it only takes a few moments to talk though the procedure first:

“Jo will take the sail ties off, working forwards from the back of the boom, and then stand at the mast ready to bump the halyard up. Once she’s there we will slow down, I’ll let off the mainsheet and Claire will turn the boat to point into the wind. When I give the signal, Jo will start hauling the sail up and Pete will tail the halyard at the companionway.”

This simple explanation gives even those with minimal sailing experience a clear vision of what’s going to happen and what their role will be. At the same time, you’re free to keep an eye open to spot any problems at an early stage.

Preparation and planning

Preparation and planning are key elements of effective skippering that help to identify potential hazards and reduce the time you will need to spend on navigation and pilotage. Time spent below with your head in the chart, pilot book or tide tables is time that you’re not in tune with what’s happening on deck, so as part of your planning make sure you have all the information you might need at your fingertips.

Even for a short day sail returning to initial home port you should have a clear understanding of the weather and tidal patterns for the day, as well as knowledge of any local regulations that may be in place. On a longer passage it’s also important to have a plan B that you can execute in the event that the it doesn’t go according to expectations. This plan should include ports of refuge accessible from your expected route.

Don’t let events overtake you

Relaxed skippers think ahead and are prepared for a wide range of eventualities. However, there may still be times at which things start to happen too fast, with a risk that events will overtake the rate at which the skipper can cope with them.

A common example of this is a tricky pilotage situation, potentially at night, when it’s critical to recognise times at which the boat is travelling faster than you can navigate. The obvious solution, slowing down, often does not come to mind in such situations, but reducing speed from say 5 knots to 4 knots gives a lot more thinking time than the 20 per cent difference in speed suggests. There may even be occasions in which it’s helpful to stop for a short while – so that you can catch up with events and get ahead.

A variety of strategies to buy additional time when necessary is therefore one of the most useful elements in a skipper’s armoury. Heaving to, furling (or partially furling) the headsail, and stemming the tide are prime examples.

All the above is not to say that good skippers don’t enjoy a stint on the helm, taking part in deck work when in open water or, for instance, preparing a meal under way, but it’s important to recognise that these tasks are secondary to their skippering role. However, if you’re sailing short handed, maybe with only one other crew member, then it is likely that all tasks will be shared equally, even if important decision making affecting the safety of the vessel and crew will always remain the responsibility of the skipper.

How to ensure your boat is in proper working condition

In this article Eva Tucker from Volvo Penta presents a handy check list of all the things that you need to check regularly in order to make sure that your boat is in a seaworthy condition. Including maintenance, safety gear and electrical checks.

Understanding marine sealants & adhesives

Sealants, adhesives and adhesive sealantsThere is a bewildering variety of sealants, adhesives and even adhesive sealants available for...

The give-way hierarchy at sea – who gives way to whom?

Whatever their size or type, all skippers have a responsibility to avoid collisions with other boats at sea.  It is...

Understanding tide tables and tidal curves

There are many factors that influence local tidal patterns and it’s essential for every sailor to have a good understanding of tide tables and tidal charts to ensure they can calculate the level of tide at any given time.

Boat maintenance – what does it involve?

The maintenance of a boat involves things like cleaning, varnishing, painting, polishing, antifouling, servicing the engine, servicing the seacocks, and maintaining the gas and plumbing systems. It all amounts to a fairly considerable amount of work that can’t be ignored if you are to keep your boat in a safe and good condition.

Dag Pike’s Boat Survey

We're really pleased to be working with Dag Pike on some great new apps for iPhone & Android. Here'a a bit more about the first app: Dag Pike's...

How to cope with an emergency at sea

A safe skipper will be mentally prepared for all kinds of potential emergencies happening at sea, including medical emergencies, engine failure, fire, a holed hull, capsize and dismasting.

Cutless bearing replacement

Cutless bearings can last for many years but if the propeller shaft is out of alignment they will wear through more quickly. If you have noticed a clunking sound when motoring then it could be a worn cutless bearing that is causing the problem.

Avoiding collisions at sea – how to stay safe on the water

Boats have many blind spots, including the headsails of sailing boats. Always keep a lookout, stay safe and remember that...

A simple guide to understanding tides when passage planning

Understanding tides when passage planning When planning a trip in tidal waters, check the tides before going afloat. Use...

Tools and spares for your boat

Tools and Spares to take to sea!

You won’t regret taking a look at our essential tips and checklist to make sure you’re prepared for routine maintenance and those unexpected jobs that come up whilst you’re afloat!

A five day sailing cruise of the Solent, UK

Welcome to our virtual Solent sailing cruise – a five day sail in the south of England from Bosham Quay in Chichester...

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 10 – The Return Trip

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the final instalment of a 10-part post where solo sailor, Bernie Branfield, shares his first-hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Dripless shaft seals

Dripless shaft seals are designed to completely stop water from entering a boat’s hull via the stern tube. There are two main types of dripless seals known as face seals and lip seals which many boat manufacturers now fit to production boats.

Essential Boat Buying Tips for First-Time Boat Owners

The first question that comes to mind when thinking about buying a boat is: what type of boat? There are more than 20 different kinds, of different sizes, for different purposes, and different pockets. So, your first step is to decide your boat type.

Boat batteries

Under-sized battery banks are one of the key factors behind power failure at sea, as well as the premature failure of batteries, so make sure that your boat battery measures up to the use you want to put it to.

How to predict wind direction and strength by reading a weather chart

Weather charts, also known as surface pressure or synoptic charts, contain a lot of information that helps weather...

How to trim a genoa sail

I recently had two new sails made by Sanders Sails, based in Lymington UK. The first to arrive was the new genoa and it took me a little while to get to know it and learn how to adjust it correctly. Here is an aide memoire for getting to know how to trim a genoa so that it will deliver the best performance.

Boat Handling – anchoring

Anchoring your yacht or motorboat Anchoring is one of the most important boat handling skills. If you can set an anchor...

Five dangers a vessel may encounter at sea

What are the main dangers a vessel may face at sea and what should skippers do to reduce the risk of these happening?

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 2 – Weather

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the second of a 10-part post where solo sailor, Bernie Branfield, shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Sailing Boat Rig Care

The rig of a sailing boat is put under huge stresses and strains so it is important for inspections of a yacht’s spars and rigging to be carried out at regular intervals.

The dangers of running aground in a motor boat

The peril of grounding a motor boat is not only an inconvenience; it can lead to substantial risks for both the vessel and its passengers. . In this article, we’ll explore the potential dangers of running aground and highlight the importance of proper navigation and preparedness to avoid these hazards!

Hull inspection – the annual checks

With the boat ashore for the winter it is time to do a hull inspection - the annual checks. Are there any scratches and chips in the...

Top 5 Reasons Why an Inflatable SUP Should Be Your Next Yacht Accessory

In this article, inflatable paddle board expert Jason Paul gives the top 5 reasons why an inflatable SUP should be your next...