Select Page

Safety at sea is not as simple as just spending money adding shiny new emergency equipment such as liferafts, danbuoys, distress flares, EPIRBs and so on. While these items are important, it’s better to view them as an insurance that offers a potential lifeline when things have already gone badly wrong.

Emergency equipment is, in effect, the nautical equivalent of the airbags in your car: very reassuring to have, but nevertheless items you will never plan on needing to activate.

Attitude to risk

More than anything else what keeps us safe at sea is our attitude to risk. Given that it’s impossible to eliminate risk, we have to be continuously alive to the constantly changing situations that are an inevitable part of going to sea, analysing them for dangers so that any current or future risks can be identified. It’s then possible to build ways to mitigating these risks into your plans, along with a margin of safety that’s appropriate to the prevailing conditions.

So what are the biggest potential dangers you’re likely to encounter? Fortunately the list is surprisingly short – to individual crew members the key hazards are:

1. Fatigue, seasickness and hypothermia.

2. Sunburn and sunstroke.

3. Accidents involving dinghies and tenders.

4. Head injuries from the boom or main sheet.

5. Falling overboard.

6. Crushing fingers in a winch.

 The biggest dangers to the boat itself that may lead to serious incidents are as follows:

1. Bumping into solid objects such as land, rocks and other vessels.

2. Failure of key equipment.

3. Severe weather.

4. Fire.

5. Sinking.

Given the potential dangers of the sea, both lists are surprisingly short. Of course, there are other things that may go wrong, but most other crisis situations you might encounter, while potentially frightening at the time, are less likely to be life threatening or result in serious injury.

 Cascade of events

When serious incidents at sea are analysed one factor always stands out: very few have a single cause. Instead, most are the result of a chain of events with a catastrophic conclusion. In many cases it would only require any one of the many links in the chain to be broken to stop the situation cascading into an ever more serious state.

The most important lesson to draw from this is that, when faced with a potential emergency situation, it must be tackled in a calm and logical fashion. That may sound obvious and straightforward, but when things start to go wrong the reality is it will require a sustained and conscious effort to avoid running around in an adrenaline-fuelled panic that can easily make things worse.

When the pressure is on, rather than attempting to make instant life or death decisions, it’s easiest to remember drills and routines – that’s why man overboard drill practice is so important. Equally, for an inexperienced crew, frequent practice at reefing is also beneficial, and the same holds true for anchoring. The more these and other activities are routine, the easier it is to carry them out under pressure, without creating new problems.

Fractures, sprains and dislocations at sea

Moving about a boat at sea often results in a few knocks and bruises, but if a crew member has a fall or major bump and is in serious pain, they should be examined and treated accordingly.

Cleaning & polishing gelcoat topsides

The gelcoat topsides of a GRP boat can be pampered and restored to their former glory relatively easily when it is ashore. Gelcoat is only a very thin outer layer of the hull, often less than 1mm thick, so you should avoid cleaning it with highly abrasive cleaners, or an-ything that could potentially damage its surface.

Essential Knots: Reef knot

Essential Knots: Reef knot Use: Tying two ends of rope together, often used for tying up a bundle of loose sail around the boom. Step...

First Aid Afloat – fish spine injury

First Aid Afloat - Here is what to do if somebody stands on a fish spine: • Check for dangers. Is it safe for you to enter...

Boat engine fuel system

If engines are installed and serviced correctly then most marine engines are very reliable, but one of the most important parts of the engine to check and service is the fuel system.

Five dangers a vessel may encounter at sea

What are the main dangers a vessel may face at sea and what should skippers do to reduce the risk of these happening?

Antifouling for leisure boats – Part 3

Antifouling is one of the least pleasant boat maintenance jobs to do, but it has to be done. The very worst job of all is removing the old antifouling as this can get seriously messy and is very hard work.

Preparing for sailboat cruising

Preparing for a sailing trip entails a lot of planning. In this blog, we take a look at some of the many safety aspects that a skipper needs to consider before heading off on a cruise.

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 2 – Weather

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the second of a 10-part post where solo sailor, Bernie Branfield, shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Marine toilets – care and maintenance

There are a number of different types of marine toilet, or heads. They fall into one of three categories – manual, electric and vacuum, the most common being the manual, hand pumped type. These have double acting piston-pumps which both discharge the waste and flush the toilet with sea water.

VHF DSC radio – how best to communicate at sea

There are many ways to communicate with others at sea. What makes the VHF DSC radio the best form of short range...

How a propeller works

Have a look around any boatyard and you will notice quite a variety of propellers – some have two blades, some have three and others have four or more. While most propellers are completely rigid some have blades that fold.

Safety Equipment Checklist for Boats

Safety Equipment Checklist for Boats   Liferaft line attached The liferaft will not work unless the trigger line is...

2023 Rolex Fastnet Race – Part 2

Simon Jollands took part in the 2023 Rolex Fastnet Race. This is the second of his articles on the race aboard Lancelot II, a Beneteau First 40.

Distress flares – which flare, how & when to use?

How to use distress flares at sea To effectively use distress flares at sea, you need to understand the different types, their purpose, and the...

How to read nautical charts

Whilst most sailors today rely on GPS to find their way at sea, nautical charts are a crucial tool for any sailor to navigate safely and effectively. Here is a reminder of some of the basic steps involved in reading a nautical chart:

Antifouling for leisure boats – Part 2

To prepare for antifouling, as soon as your boat has been lifted out and pressure washed, you need to check all the surfaces of the hull below the waterline, remove any remaining barnacles and check for blisters.

Keel maintenance and repair – Part 1

Keels are designed to act as underwater foils that generate lift as the boat moves through the water, counteracting the leeward force of the wind and enabling the boat to sail closer to the wind. Keel maintenance and repair is essential for the performance of your boat.

Docking a Motorboat

Docking a motorboat can be a challenging task, especially for beginners, but with practice and attention to detail, it becomes much easier. Here’s a step-by-step guide to help you dock your motorboat safely and efficiently.

Narrowboating on the Kennet and Avon Canal

A recently cancelled sailing event I was due to take part in left us with a free weekend in the diary. Given that my wife and I were celebrating a bumper wedding anniversary and the weather forecast was for fine weather, we decided to hunt around for a last minute canal holiday.

Boat electrics

All boat owners should have a basic knowledge of electrics, both to avoid encountering electrical problems at sea and to stand a chance of solving them should they occur.

Boatyard Health and Safety

Boat storage facilities are potentially hazardous environments and it is the responsibility of both boat owners and boatyards to ensure that the...

Wooden Hulls – Part 1

Traditional wooden boats have a plank on frame construction, a centuries old boat building method that is still in use today. Variations of the traditional method include carvel, clinker and strip planking, which all relate to the way the planking is attached to the frame.

Boating emergency – how to broadcast a MAYDAY emergency call

How to broadcast a MAYDAY emergency call   How to broadcast a MAYDAY emergency call if a vessel or person is in grave...

Understanding your mast and rigging

The rig of a sailing boat is put under huge stresses and strains so it is important for inspections of a yacht's spars and rigging to be...